Prodigy Aerial Yoga Rig

7 in stock

Fully tested and certified in the UK. This is the perfect indoor A-frame for setting up your aerial yoga hammocks or doing some aerial conditioning!

Note: The chrome on this rig is not weather-resistant and is not designed to be left outdoors.

It can be very expensive to properly install rigging points in your home, and if you’re renting it might not even be a possibility. Screwing a hook into the ceiling, or any other cheap “solutions” to rig your aerial hammocks at home just isn’t safe.

Prodigy has designed this Aerial Yoga Rig to solve this problem for you. At the lowest height, you can use it inside most homes, or on a nice day take it outside and use it on the highest setting. Don't forget to bring it back inside if rain clouds are coming!


The Prodigy Aerial Yoga Rig has a footprint of approx. 2.0m x 2.6m (approx. 6’1” x 8’3”). At the highest setting, it is approx. 2.9m (9’6”) tall.

You can remove connector sections of the legs to reduce the height to approx. 200 cm (approx. 6’6”) which will be low enough to fit inside any house. At this height it has a footprint of approx. 1.8m x 1.7m (approx. 5’10” x 5’11”). The top bar (bridge section) is approx. 100cm (39 inches) long and there is approx. 80cm (31 inches) between the leg connector sections.

The setup is easy enough to do by one person in about 10 mins but it’s even easier and quicker to set up with two people.

The maximum length of any components is approx. 105cm (41 inches). This means it will easily fit into any car and takes up minimal space in your home when not in use. The total weight of all the components is 38kgs.

In nice weather, it's nice to set it up outside and practice in the sun. Just remember that Aerial Silks/Hammocks don't like to be left in the sun, and the rig doesn't like to be left outdoors, so bring the rig inside when you have finished training.



Prodigy has designed this A-frame for Aerial Yoga but with absolutely no compromise on safety or strength. Each 45mm diameter/1.8mm thick steel tube used for the legs is joined by threaded connectors, the threaded joins help to increase the strength and stability of the rig.

The top bar (bridge section) is made from an incredibly strong 50mm diameter, 3mm thick, seamless steel tube. Additional support for the rig is achieved by 5.5mm thick steel gusset plates welded onto the bridge section. We recommend choking 2x Prodigy Aerial Slings - 18mm-30cm in length onto the top bar to create your anchor points.

The straps provided will stop the legs from splaying and together with the other design elements lead to the most stable freestanding indoor A-frame we’ve seen or used!

It’s also the strongest indoor A-frame we’ve seen.
Working  Load Limit (WLL) : 230kg

Factor of Safety (FOS) : 5:1

The results are based on static load tests rigged from quarter points to simulate 2-point Aerial Yoga use.

The WLL is based on the loading up to permanent deformation, not destruction.

Tested in the UK at an independent testing facility. Tests are conducted by Tech-IOSH qualified testers.

This WLL is suitable for low-level dynamic loading, as expected in Aerial Yoga or Aerial Conditioning.


This rig is designed and intended for portability and Aerial Yoga. You will be able to use this for conditioning Aerial Hoop and Silks. Due to the small footprint, practicing Aerial Hoop can cause you to hit the legs on the rig depending on the skills being practiced, so you will need to adapt to the smaller space.



Bridge (top bar) x1
Connector (leg sections) x8
Bottom Rods (leg sections) x4
Feet x4
Pins x4
Stabilising strap x1


More Information
Country of ManufactureChina
Base2.0m x 2.6m (6’1” x 8’3”)
Height2.9m (9.6')
Write Your Own Review
You're reviewing:Prodigy Aerial Yoga Rig
Your Rating
We found other products you might like!
All text, images and animations are copyright © 2023 Firetoys Ltd | Incorporated in Delaware