Prodigy Hammock Loop Adjusters (pair)
- Buy 10 for $67.50 each and save 4%
These adjusters use the weight of the user to lock the hammock in place while in use, as long as there is weight in the hammock, these aren't going anywhere!
This also means that all you have to do to adjust them is stand up! There are no knots to undo and re-tie, or even carabiners to unclip, just pull the fabric through the loop, apply a bit of pressure, and they will lock again
The O rings on these are smaller than the usual O rings supplied with our hammocks, and measure 50mm across internally with an 8mm wire (so a 66mm external diameter)
These adjusters come as a pair, and need to be rigged as a pair, one at each end of your fabric. If multiple pieces of fabric are fed through one, there is a risk they will slip over each other, however, you can rig both adjusters from the same rigging plate to keep a 1-point hammock rigging setup.
These have been manufactured and tested in the UK, and when used in conjunction with the prodigy aerial hammock have a WLL of 150kg
|Country of Manufacture||UK|
|Working Load Limit||330lbs|
|Minimum Breaking Strain (MBS)||20kN|